How do I use the Fertility Tester?

Directions:

STEP ONE Remove the cover and pull out the eye piece.
STEP TWO Clean the eyepiece with a damp cotton swab then dry with lint free cloth,like the cloth that is used to clean eyeglasses.
STEP THREE Put some saliva on the part of the lens that will be pointing outward.
STEP FOUR Re-insert the eyepiece in its place and allow the sample to dry, about 10 minutes depending on the temperature where you are.
STEP FIVE When the saliva is dry, put the eyepiece to your eye and focus by turning the rim of the eyepiece.

Results:

Ovulation Phase : When a women is most fertile and most likely to conceive, her saliva will dry in fern-like patterns (see diagram bottom left).
Transition Phase : The picture is mixture of fern and bubbles or spots, during which the possibility for conception still exists (see middle diagram).
Safety Phase: During non-fertile days, the pattern is random, and unconnected dots appear (see below diagram, at right).

Important:

Your saliva sample can be affected by: